1232 Woolworths Janus National DC - Site proiect public
-
23rd mai 2022, Telehandler licensing requirements - RCC
Dear All,
To alleviate any confusion with the use of telehandlers on the project and the licensing requirements from SafeWork NSW I am writing to you to explain the requirement.
Operator licenses
If a telehandler has a capacity greater than three tonne and is configured as a crane (introduction and use of a jib attachment), you must have a high-risk work licence – non slewing crane (CN class) or a slewing mobile crane license to operate.
If a telehandler has a capacity less than three tonne, you must be trained and competent in operating the telehandler and attachments (Gold Card and jib attachment training module).
To use a slewing telehandler, with a slewing limit greater than five degrees, you must have a high-risk crane license – C0, C1, C2 or C6.
If a telehandler is used as a work platform, with a boom length of 11 metres or more, you must have a high-risk work licence – elevated work platform (WP class). If the boom is less than 11 metres, you must be trained and competent in operating the telehandler and attachments) – Gold Card & Yellow Card.
A qualified Dogman or Rigger is the only person that can attach and disconnect a load from the hook attached to the Jib attachment – No exceptions.
Moving forward, RCC requires that all 4 tonne telehandler operators must have a HRWL Minimum CN. Without this licence, use of a telehandler exceeding a 3 tonne capacity will not be permitted on site irrespective of whether a jib attachment is being used or not. This level of control is being implemented in order to ensure that any risk of incorrect jib attachment use does not occur.
If your telehandler can be de-rated by the manufacturer please show evidence that this has been undertaken with a certificate of calibration from the manufacturer showing this has been completed before allowing it to be operated on the project.
Any questions please don’t hesitate to contact me.
Regards,
Jason Camilleri, Senior Project WHS&E Advisor
Direct 02 9902 4700 | Fax 02 9439 1114 | Mobile 0448 005 258
Level 3, 4 Broadcast Way, Artarmon NSW 2064
www.richardcrookes.com.au
Condiții meteo curente la șantier
Ultima actualizare la: 09:21
Temperatură: 22C (Aplicație 25C)
Viteza vântului: 7KMH
Max. Vânt: 17KMH @03:21
Ploaie de la 9 AM: 0,2mm
Temp min: 21C @06:48
Temp max: 41C @13:54 19.12.2025
Rafală: 9KMH
Rafală max: 19KMH @03:21
Locație observație - Holsworthy, NEW SOUTH WALES
Fus orar - Ora standard a Australiei Orientale
Prognoză - sâmbătă, 20 decembrie
Possible storm.
Min: 21C Max: 32C
Șanse de ploaie: 30%
Precipitații așteptate: 0 la 1mm
Locație prognoză - Sydney, NEW SOUTH WALES
Fus orar - Ora standard a Australiei Orientale
Mâine - duminică, 21 decembrie
Possible shower.
Min: 24C Max: 31C
Șanse de ploaie: 40%
Precipitații așteptate: 0 la 1mm
Cunoașteți cerințele EIP pentru acest șantier?
Asigurați-vă că aveți echipamentul de siguranță corect pentru prima zi la locație.
Începeți să lucrați mai devreme atunci când ajungeți în locație.
Finalizați înregistrarea la șantier online când doriți și economisiți timp.
Cunoașteți cerințele EIP pentru acest șantier?
Asigurați-vă că aveți echipamentul de siguranță corect pentru prima zi la locație.
Începeți să lucrați mai devreme atunci când ajungeți în locație.
Finalizați înregistrarea la șantier online când doriți și economisiți timp.