1232 Woolworths Janus National DC
Πρόσφατα δελτία
  • 23rd Μαΐου 2022, Telehandler licensing requirements - RCC

    Dear All,

    To alleviate any confusion with the use of telehandlers on the project and the licensing requirements from SafeWork NSW I am writing to you to explain the requirement.

    Operator licenses

    If a telehandler has a capacity greater than three tonne and is configured as a crane (introduction and use of a jib attachment), you must have a high-risk work licence – non slewing crane (CN class) or a slewing mobile crane license to operate.

    If a telehandler has a capacity less than three tonne, you must be trained and competent in operating the telehandler and attachments (Gold Card and jib attachment training module).

    To use a slewing telehandler, with a slewing limit greater than five degrees, you must have a high-risk crane license – C0, C1, C2 or C6.

    If a telehandler is used as a work platform, with a boom length of 11 metres or more, you must have a high-risk work licence – elevated work platform (WP class). If the boom is less than 11 metres, you must be trained and competent in operating the telehandler and attachments) – Gold Card & Yellow Card.

    A qualified Dogman or Rigger is the only person that can attach and disconnect a load from the hook attached to the Jib attachment – No exceptions.

    Moving forward, RCC requires that all 4 tonne telehandler operators must have a HRWL Minimum CN. Without this licence, use of a telehandler exceeding a 3 tonne capacity will not be permitted on site irrespective of whether a jib attachment is being used or not. This level of control is being implemented in order to ensure that any risk of incorrect jib attachment use does not occur.

    If your telehandler can be de-rated by the manufacturer please show evidence that this has been undertaken with a certificate of calibration from the manufacturer showing this has been completed before allowing it to be operated on the project.

    Any questions please don’t hesitate to contact me.
    Regards,

    Jason Camilleri, Senior Project WHS&E Advisor



    Direct 02 9902 4700 | Fax 02 9439 1114 | Mobile 0448 005 258
    Level 3, 4 Broadcast Way, Artarmon NSW 2064
    www.richardcrookes.com.au


Πρόγνωση Καιρού Ιστοσελίδας
Ο καιρός στο τρέχων εργοτάξιο

Τελευταία ενημέρωση στις: 1:21 μμ
Θερμοκρασία: 17C (Εφαρμογή 12C)
Ταχύτητα Ανέμου: 15KMH
Μεγ. Άνεμος: 22KMH @12:21 πμ
Βροχή από τις 9 π.μ.: 0,0mm
Ελάχιστη θερμοκρασία: 8C @4:32 πμ
Μέγιστη θερμοκρασία: 18C @1:18 μμ
Ριπή: 17KMH
Μέγιστη ριπή: 39KMH @12:21 πμ


Η παρατήρηση προέρχεται από - Bureau of Meteorology
Τοποθεσία παρατήρησης- Holsworthy, NEW SOUTH WALES
Ζώνη ώρας - Χειμερινή ώρα Ανατολικής Αυστραλίας
Πρόγνωση - Δευτέρα, 14 Ιουλίου

Shower or two.
Ελάχιστο: 8C Μέγιστο: 16C
Πιθανότητα βροχής: 70%
Αναμενόμενη βροχόπτωση: 0 για 4mm


Η πρόγνωση προήλθε από - Bureau of Meteorology
Τοποθεσία πρόγνωσης - Sydney, NEW SOUTH WALES
Ζώνη ώρας - Χειμερινή ώρα Ανατολικής Αυστραλίας
Αύριο - Τρίτη, 15 Ιουλίου

Sunny.
Ελάχιστο: 7C Μέγιστο: 19C
Πιθανότητα βροχής: 10%


Σημαντικά έγγραφα εργοταξίου
Νέος στο εργοτάξιο;

Γνωρίζετε τις προδιαγραφές των ΜΑΠ για το συγκεκριμένο εργοτάξιο;

Βεβαιωθείτε ότι έχετε τον κατάλληλο εξοπλισμό ασφαλείας για την πρώτη ημέρα σας στο εργοτάξιο.

Προβολή ΜΑΠ (Μέσα Ατομικής Προστασίας) που Απαιτούνται στην Εργασία

Ξεκινήστε να εργάζεστε συντομότερα όταν φτάνετε στο εργοτάξιο.

Ολοκληρώστε την καταχώρηση του εργοταξίου σας διαδικτυακά, με την άνεσή σας και εξοικονομήστε χρόνο.

Έναρξη εγγραφής

Νέος στο εργοτάξιο;

Γνωρίζετε τις προδιαγραφές των ΜΑΠ για το συγκεκριμένο εργοτάξιο;

Βεβαιωθείτε ότι έχετε τον κατάλληλο εξοπλισμό ασφαλείας για την πρώτη ημέρα σας στο εργοτάξιο.

Προβολή ΜΑΠ (Μέσα Ατομικής Προστασίας) που Απαιτούνται στην Εργασία

Νέος στο εργοτάξιο;

Ξεκινήστε να εργάζεστε συντομότερα όταν φτάνετε στο εργοτάξιο.

Ολοκληρώστε την καταχώρηση του εργοταξίου σας διαδικτυακά, με την άνεσή σας και εξοικονομήστε χρόνο.

Έναρξη εγγραφής